Author Kit

Introduction

The REM 2024 paper submission and review processes will be entirely electronic and will be conducted online using EDAS as described below:

Authors who wish to participate in the conference need to register with the EDAS on-line submission system and then use it to submit their full papers.
Full paper submission (up to 6 pages) must be completed on or before the “Paper Submission” deadline listed in the Important Dates.
The submitted full papers will be peer reviewed, using the online review system, by experts selected by the conference Technical Program Committee for their demonstrated knowledge of relevant topics. The results of the review process will be posted on this website, and authors will also be notified by email. Review results will be ready by the “Review Decision Notifications” date.
Authors of accepted papers will prepare a final version of their paper and will submit it using the EDAS online submission system. The version of the final manuscript will be substantially the same as the submitted full paper but will take into account reviewers’ comments. The final paper must be completed and submitted on or before the “Final Submission and Author Registration” deadline.
The final version of an accepted paper will appear in the conference proceedings provided that at least one of the authors registers. This must be carried out on or before the “Final Submission and Registration” deadline.
REM 2024 conference follows the IEEE No-Show Policy, which states that it is up to the Conference Committee’s discretion to allow “no shows” to be published in the IEEE Xplore Digital Library. If a change is made to a paper after its acceptance to a conference, IEEE recommends that the Program Committee review the final paper.
Accepted papers will be submitted for inclusion into IEEE Xplore subject to meeting IEEE Xplore’s scope and quality requirements.

Format

To make the review process easy for reviewers, and to assure that submitted papers and final manuscripts are readable through the online review system, authors are asked to submit papers that are formatted according to the instructions given below. Submitted paper formatting is identical to final manuscript formatting. Papers not conforming to the required format will be rejected without review. Similarly, final manuscripts not conforming to the required format will not appear in the proceedings.

Contact

Please make sure that you put the conference name (REM 2024) and the paper number, assigned by the online submission system, on all correspondence. Additional inquiries regarding submission of papers should be directed to:

Dr. Hisham ElMoaqet, rem2024@gju.edu.jo

Instructions

Authors are required to complete the procedures in the following list before the specifiedd deadlines. Detailed guidelines for each of these procedures are provided below.

Step 9: Prepare a lecture or poster presentation

Step 1: Complete a properly formatted Paper

Papers should be formatted for standard A4 size paper using IEEE conference proceedings templates:

Word Template: conference-template-a4

Latex Template: conference-latex-template

For more information, refer to http://www.ieee.org/conferences_events/conferences/publishing/templates.html

Use the following guidelines when preparing your paper:

Length

You are allowed a total of 6 pages: This is the maximum number of pages that will be accepted, including all figures, tables, and references. Although not encouraged, authors can have papers longer than 6 pages, but not exceeding 8 pages. Each of the extra two pages will incur a fee. Any paper that exceeds the 8-page limit will be rejected without review.

Language

All papers must be in English.

Page size and margins

Papers should be formatted for standard A4 size (210 x 297 mm) paper. All printed material including text, illustrations, and charts, must be kept within the print area. The top, bottom, left, and right margins and the space between the two columns must be as set in the templates and not changed.

Typeface

To achieve the best viewing experience for the review process and the conference proceedings, Times-Roman font must be used. If a font face is used that is not recognized by the submission system, your paper will not be reproduced correctly. Use font sizes as used in the template.

Title

The title should be centered and in 24-points size. Do not use LaTeX math notation (e.g., $x_y$) in the title; the title must adhere to the Unicode character set. Also try to avoid uncommon acronyms in the title.

Author list

The authors’ name(s) should appear below the title with capital and small letters. The authors’ affiliation(s) should appear below the names with capital and small letters. The order of the authors on the document should exactly match in number and order the authors typed into the online submission form.

Abstract

Each paper should contain an abstract of 75 to 150 words that appears at the beginning of the paper. Use the same text that is submitted electronically during the on-line submission process.

Index terms (keywords)

Enter 4 to 6 keywords separated by semicolons. Keywords may be selected from the IEEE keyword list found at:

http://www.ieee.org/organizations/pubs/ani_prod/keywrd98.txt.

Body

Major headings appear centered in the column. Subheadings appear in italic capital and small letters. They start at the left margin of the column. All text must be fully justified with single-line spacing. All paragraphs within a section should be indented.

Illustrations and color

Illustrations must appear within the designated margins. They may span the two columns. If possible, position illustrations at the top or bottom of columns, rather than in the middle. Caption and number every illustration. Figures and tables should be numbered consecutively and separately from each other. The illustration number should be an Arabic number for figures and a Roman number for tables followed by a period, e.g. Figure 1. or TABLE I. The caption itself should not be in bold and should be centered below the figure or above the table.

All halftone illustrations must be clear in black and white. Color illustrations will appear in the electronic version of the proceedings, but the printed version will be produced in black and white. Therefore, make sure that your illustrations are acceptable when printed in black and white.

Equations

Number equations consecutively with Arabic numbers in parentheses placed at the right hand margin of each column.

References

List all references at the end of the paper. The references should be numbered in order of appearance in the document. Refer to IEEE conference proceedings template for more details.

Footnotes

Use footnotes sparingly (or not at all) and place them at the bottom of the column on the page on which they are referenced. Use 8-point type, single-spaced. To help your readers, avoid using footnotes altogether and include necessary peripheral observations in the text (within parentheses, if you prefer, as in this sentence).

Pagination

Please do not paginate your proposal. We will add appropriate page numbers to accepted papers when the conference proceedings are assembled.

File format

Papers must be submitted in Adobe’s Portable Document Format (PDF).

The conference is required to ensure that documents follow this specification. Simplified requirements for creating PDF files for IEEE Xplore are enumerated in:

IEEE Requirements for PDF Documents v3.2 [PDF]

The submitted file:

must not be in compressed format,
must not have Adobe Document Protection or Document Security enabled,
must have ‘A4’ (210 x 297mm) sized pages,
must be in first-page-first order, and
must have ALL FONTS embedded and subset.

Filename

The filename of the document file is not important since the submission system will rename the file but please make sure that you use .pdf extension for the file. After you submit the paper, please make a note of your paper number and use it in all your correspondence.

File size limit

Authors will be permitted to submit a document file up to 4 MB (megabyte) in size. To request an exception, please contact the conference contact person listed above.

Step 2: Submit the paper electronically

The following description outlines how to submit your paper electronically.

Gathering the required information

When you have your document file ready, gather the following information before entering the submission system: Document file, Name, affiliation, address, and e-mail address of each author, Paper title, Text file containing paper abstract in ASCII text format (for copying and pasting into web page form).

Obtaining an EDAS account

Please obtain a username and password from the on-line submission system EDAS. This can be done in one of two ways:

If you have used the EDAS system previously, for this or any other conference, then you already have an account on the system. Thus, there is no need to create a new account. Simply use your existing account. Your username will be your email. If you cannot remember your password then ask EDAS to email it to you by following the link EDAS PASSWORD REMINDER.
If you are a new user of the EDAS system, then create an new account by following the link NEW EDAS ACCOUNT. Please make a note of your username and password as you will need them to make more submissions, edit existing submissions, update personal information, and submit final manuscripts.

Submitting your paper

Go to the paper submission page at https://edas.info/N31872

SUBMIT PAPER

When you submit your proposal, you will be asked to enter the paper title, keywords, abstract text, subject category, and authors’ contact information. You will also be asked to upload the file containing your proposal. Depending on the size of your file and your internet connection speed, the file upload may take a few minutes. If all necessary information has been entered, the system will display a short message giving you the ID number of your paper. You will also receive an e-mail notification with the details of your submission. If you do not see the confirmation page after uploading your file, you may not have successfully completed your file upload. If you encounter trouble, please contact the conference contact person listed above.

Step 3: Check the REM 2024 website for the status of your paper

Review Process

Your submitted paper will be checked for errors and you will be notified if you need to re-submit your paper. If your submission passes the initial inspection, it will be entered into the review process. Depending on the subject of your paper, the Track Chairs will assign your technical paper to a committee of reviewers (not fewer than three reviewers). The reviewers will review your paper and will rate it according to contribution, quality, relevance, originality, and clarity of presentation. The conference Technical Program Committee will use these reviews to determine which papers will be accepted for presentation during the conference.

Review Results

The Technical Program Committee’s decision will be posted on the website by the “Authors Notifications” deadline. Authors can login using their username and password and check the status of their paper and the reviewer comments. The review result, along with reviewer comments if any, will also be communicated to the submitting authors by email.

Step 4: Revise accepted papers for final submission

If your paper is accepted by the review process for presentation and publication at REM 2024, you should prepare your final manuscript for submission. This will be substantially the same as the submitted paper but must take into account reviewers’ comments. The REM 2024 Technical Program Committee reserves the right to reject a final manuscript if the reviewers’ comments are not adequately addressed.

When preparing your final manuscript, use the same formatting specifications described above. Final manuscripts not conforming with the required format will not appear in the proceedings.

Step 5: Verify that your final manuscript is IEEE Xplore compliant

REM 2024 papers will be submitted for publications in IEEE Xplore Digital Library. Therefore, all final manuscript files must adhere to the IEEE Xplore PDF specifications for compatibility. If your final manuscript file is not IEEE Xplore-compliant then it will be automatically withdrawn from presentation and publication.

More details on creating IEEE Xplore-compliant PDF files can be found under “File Format” discussed in Step 1 above.

In order to facilitate the process of creating and verifying PDF files, REM 2024 has registered for use of the IEEE tool: IEEE PDF eXpress Plus. This is a free service to IEEE conferences, allowing their authors to make IEEE Xplore-compliant PDFs (Conversion function) or to check PDFs that authors have made themselves for IEEE Xplore-compliance (PDF check function).

In order to verify that your final paper is IEEE Xplore-compliant please follow the steps below.

Go to the IEEE PDF eXpress Plus site and log-in as follows. The following procedure should be used by first-time and returning users (TO-DO: review this procedure).

1. Click “New Users – Click Here”.
2. Enter 63063X for the Conference ID, your email address, and choose a new password. Continue to enter information as prompted.
3. Fill the needed information to Create Account and submit. Even if you have used those information previously for an account, you can use them again.
4. A message declaring an IEEE PDF express plus account is created will appear. Click on Continue button which will open your account home page and showing the title status.
5. Click on “Create New Title”.
6. Enter a title information and click on Submit file for Checking or Converting.
7. You can then upload source file to convert it pdf or upload a pdf file for checking.
8. It is recommended to create a new account if you are returning later to use IEEE PDF eXpress plus site.
9. You will receive an email with your Checked PDF or IEEE PDF eXpress Plus-converted PDF attached. If you submitted a PDF for Checking, the email will show if your file passed or failed. Take one of the following actions:

If the PDF submitted fails the PDF check

1. Submit your source file for conversion by clicking “Try again”, then “Submit Source Files for Conversion” OR
2. Read the PDF Check report, then click “The PDF Check Report” in the sidebar to get information on possible solutions OR
3. Click “Request Technical Help” through your account.

If you are not satisfied with the IEEE PDF eXpress Plus-converted PDF

1. Resubmit your source file with corrections by clicking “Try again”, then “Submit Source Files for Conversion” OR
2. Submit a PDF by clicking “Try again”, then “Submit PDF for Checking” OR
3. Click “Request a Manual Conversion” through your account.

If the PDF submitted passes the PDF Check, or you are satisfied with your IEEE PDF eXpress Plus-Converted PDF

1. Log back into your PDF eXpress Plus account and approve your PDF for collection.

Note: Uploading a paper to IEEE PDF eXpress Plus is NOT the same as submitting the final paper for publication. You will still need to submit the checked PDF of your final paper through EDAS. Please refer to the REM 2024 online final paper submission guidelines below.

Step 6: Submit final manuscript electronically

Final paper submission

You are required to submit the IEEE Xplore-compliant PDF file of your final manuscript by the “Final Submission and Author Registration” deadline. No extensions will be granted beyond the deadline. Kindly note that one of the authors must register (see Step 8) to enable submission of the final manuscript. Failure to meet the deadline will result in an automatic withdrawal of your paper from presentation and publication.

Please follow the steps below to submit your final paper electronically:

1. Go to the online submission system EDAS and log-in using your EDAS account (this should be the same account you have used to submit the initial paper). Your username will be your email. If you cannot remember your password then ask EDAS to email it to you by following the link EDAS PASSWORD REMINDER.
2. Click on the “My Papers” menu item at the top of the page. This will produce a list of all your papers on the EDAS system.
3. Click on the title of the paper that you want to submit. This will take you to the individual paper page that contains all details of the paper.
4. Make sure that all author information are stored correctly on EDAS and matches the information on the PDF file. Author information (e.g. names, affiliations, etc.) that will appear in conference publications and materials (e.g. Proceedings, program, badges, etc.) will be taken from the EDAS system and not from the submitted PDF file. In particular:

Make sure that ALL paper authors are included on the author list on EDAS. If you need to add/delete an author then click on the “Add Author” icon within the “Authors” field.
Make sure that the order of authors on EDAS is correct. If you need to change the order of authors then click on the “Move Author Up” and “Move Author Down” icons within the “Authors” field.
Make sure that all authors update their profile (affiliation, email, country, etc.) on the EDAS system. To achieve this, the author needs to log-in to his/her EDAS account and click on the “My Profile” menu at the top of the page.

5. Make sure that all paper information are stored correctly on EDAS and matches the information on the PDF file. Paper information (title, abstract, keywords) that will appear in conference publications (e.g. book of abstracts, proceedings, CD-ROM, etc.) will be taken from the EDAS system and not from the submitted PDF file. If you need to modify paper information then click on the “Edit” icon next to the “Title” / “Abstract” / “Keywords” field.
6. Click on the “Upload Manuscript” icon within the “Final Manuscript” field. This will take you to a new page. Click on the “Browse” button and browse to your IEEE Xplore-compliant final PDF file. Click on the “Upload Manuscript” button to upload the selected file to the system. Depending on the size of your file and your internet connection speed, the file upload may take a few minutes. If the file is uploaded successfully then a confirmation message will be displayed. You will also receive an e-mail confirmation with the details of your submission. If you do not see the confirmation page after uploading your file, you may not have successfully completed your file upload. If you encounter trouble, please contact the conference.

Final paper inspection

Similar to the paper submission, your final manuscript will be checked to ensure that it meets all formatting and compatibility requirements to be included in a visually pleasing and IEEE Xplore-compliant proceedings. If we encounter errors in the appearance or compatibility of your document file, you will be contacted by email.

Step 7: Submit copyright form electronically

Every REM 2024 paper accepted for presentation and publication must have attached to it an IEEE Copyright transfer form. You are required to submit the IEEE Copyright transfer form by the “Final Submission and Author Registrations deadline. No extensions will be granted beyond the deadline. Failure to submit the IEEE Copyright transfer form by the deadline will result in an automatic withdrawal of your paper for presentation and publication.

Please follow the steps below to submit your IEEE Copyright transfer form electronically:

1. Go to the on-line submission system EDAS and log-in using your EDAS account (this should be the same account you have used to submit the initial and final papers). Your username will be your email. If you cannot remember your password then ask EDAS to email it to you by following the link EDAS PASSWORD REMINDER.
2. Click on the “My Papers” menu item at the top of the page. This will produce a list of all your papers on the EDAS system.
3. Click on the title of the paper that you want to submit the copyright form for. This will take you to the individual paper page that contains all details of the paper.

4. Click on the “Record Copyright Form” icon within the “Copyright form” field. This will take you to a new page. Click on the “IEEE copyright submission” button. This will take you to an IEEE Electronic Copyright Form page generated specifically for your paper. Follow the instructions there to submit an electronically signed copyright transfer form to IEEE. Note that once you perform this step successfully you will not need to fax or mail a paper copyright form.

Step 8: Register for the conference

The final version of your accepted paper will appear in the conference proceedings provided that at least one of the authors registers. This must be carried out on or before the “Final Submission and Author Registration” deadline. Registration fees and instructions for registration are available under the Registration page.

Step 9: Prepare a lecture presentation

Prepare a 15-minute presentation and bring is on a Flash memory. The presentation computer has PowerPoint and PDF Reader. To upload your presentation to EDAS, please follow the steps below to submit your presentation electronically:

1. Go to the on-line submission system EDAS and log-in using your EDAS account (this should be the same account you have used to submit the initial and final papers). Your username will be your email. If you cannot remember your password then ask EDAS to email it to you by following the link EDAS PASSWORD REMINDER.
2. Click on the “My Papers” menu item at the top of the page. This will produce a list of all your papers on the EDAS system.
3. Click on the title of the paper that you want to submit the presentation for. This will take you to the individual paper page that contains all details of the paper.
4. Click on the “Upload Presentation” icon within the “Presentation” field. This will take you to a new page.
5. Browse for your presentation file and click “Upload presentation” button.

Contact Us